Showing posts with label Tuning. Show all posts
Showing posts with label Tuning. Show all posts

This 1980 Toyota Corolla TE71 Packs a Big-Block 454 / 7.4-liter Chevy V8


Let us introduce you to our find of the day; a 1980 Toyota Corolla TE71 Coupe retrofitted with a big brawny classic American V8 powerplant. This wolf in sheep's clothing was once powered by a small four-cylinder engine but now comes with a 454 cubic inch (equal to 7.4-liters) big block Chevrolet V8 powerhouse that drives the wheels through GM's Turbo-Hydramatic 400 transmission.

According to the eBay seller, "with 13 inch tires it only goes about 65 [we'll assume he's talking about mph here] at 4000 rpms, but it gets there in about 4 seconds" and while driveable, the car needs some TLC to be road-worthy. The current bid on eBay is $3,251 but the reserve has not been met yet.

Source: eBay via Autoholics


_______________________________GALLERY_______________________________



Range Rover Sport Trio from Project Kahn


British tuning firm Project Kahn has presented its 2011 lineup of modified Range Rover Sport models, which comprise three variants featuring select exterior and interior appointments, plus some performance upgrades.

The diesel-powered Range Rover Sport 3.0 TDV6 RSE Signature Edition is the entry-level model of the range, and it comes with a comprehensive exterior styling package that includes new bumpers, a roof spoiler, twin mesh front grille and side vents, complemented by 22-inch Kahn RSL alloys. Inside, the Signature Edition gets front headrests clad in twin mesh, Kahn gauges and clock, inserts with Swarovski diamonds, stainless steel sill plates and a leather key ring.

The finishing touch is a Project Kahn Acoustic Supersound four-pipe exhaust system, said to emit a “unique deep rumble sound”.

Next up is the more aggressive Range Rover Sport RSE300 Cosworth, which, besides being fitted with the Signature Edition bodykit, also features a so-called painted floating roof, LED daytime running lights, a boot spoiler and 22-inch RS Matte Pearl Grey wheels. According to the tuning firm, a Cosworth engine conversion is responsible for a noticeable power increase.

The RS600 is the range-topping model and it features a 6-piece bodykit, integrated LED lights and custom wheels. The interior is covered in high-quality perforated and quilted leather, complemented by contrasting stitching applied to the steering wheel and gear shifter. Other appointments include the blue Kahn gauges and clock, plus a leather key ring.

By Csaba Daradics


_______________________________GALLERY_______________________________



Chicago Preshow: Lexus CT 200h Concept Tune by Five Axis


Lexus will be showing off a wilder CT 200h prepared by parent company Toyota's tuning partner Five-Axis at the upcoming 2011 Chicago Auto Show, which runs for the public from February 11 to 20. The highly-modified Five Axis Project CT will be dressed in a custom made wide body kit with hybrid's bad-boy appearance further enhanced by the JDSU “Dark Passage” paint, the lowered ride height (thanks to a TEIN Flex coilover suspension system), and custom 19-inch FIVE:AD forged alloy wheels.

No word on any powertrain improvements, but the CT 200h concept study will get a bespoke interior treatment and a Stoptech High Performance Big Brake Kit on the front.

The Five Axis Project CT will be joined by numerous Lexus models including vehicles from last year’s SEMA Show such as a customized LS600h L by VIP Auto Salon and a revamped RX 450h courtesy of tuner Paul Tolson, EST Styling, plus the full range of production models like the 2012 LFA sports car.



Brabus Presents the World’s First Euro 6 Compliant Performance Kit for Diesel Models


Mercedes-Benz tuning specialist Brabus has presented a new ECO PowerXtra D6S performance kit for the S350 BlueTec, and by doing so, the company claims to have created the world’s first tuned diesel-powered car that meets the Euro 6 emissions standard, scheduled to go into effect in 2014. Available for both rear-while drive and 4MATIC four-wheel drive variants, the kit delivers an additional 55HP and 70 Nm (52 lb-ft) of torque, for a total of 313HP and 690 Nm (509 lb-ft).

Designed to work like a plug-and-play device, the module increases the 3.0-liter V6 diesel’s output depending on the selected shift mode of the 7G-Tronic Plus automatic transmission. In “Eco” mode, peak torque increases, but the engine output remains unchanged (258HP), while in “Manual” or “Sport” mode maximum power is also boosted.

The modified S350 sprints from standstill to 100 km/h (62 mph) in a very respectable 6.5 seconds and can reach an electronically limited top speed of 250 km/h (155 mph).

The Brabus ECO PowerXtra D6S unit can be also fitted to all Mercedes E350 CDI BlueEfficiency variants as well as the CLS 350 CDI BlueEfficiency model, delivering identical output.

All models come with a three-year or 100,000 km (62,000 miles) warranty and can be specified with a custom Brabus stainless-steel exhaust with 4 tailpipes, delivering a more distinctive exhaust note and further optimizing power yield.

By Csaba Daradics



_______________________________GALLERY_______________________________



A Nissan Silva Coupe with a Schizophrenic Personality


In October of 2010 we brought you a Toyota Soarer / Lexus SC that had been transformed into an abomination with a Mercedes-Benz CLK DTM front end and a Nissan 200SX rump. It was bad, but I still liked it better than the snooze-mobile that was the ‘91 Soarer / CS.

Well, from the same website that brought us that automotive mullet comes yet another creation that’s been refashioned into something else. This time its a Nissan Silva. This particular freak of coach building features a Mercedes-Benz rear end (or at very least the taillights) and Nissan 350Z front end. The result is less than impressive.

I don’t know what’s worse – the matte white that makes the car look like it’s still in primer or the cacophony of weird vents jutting out of the plastic snap-on bodywork. Despite the owner’s best efforts, the rear bumper clearly doesn’t fit, jutting out beyond the rear wheels and necessitating the addition of those awful rear bulges. Mitsuoka could do better with a Nissan Micra and papier-mâché.

Though don’t take my word for it. Study the pictures and deliver your verdict in the comments section below.

By Tristan Hankins

Source: Farmofminds


_______________________________GALLERY_______________________________


AC Schnitzer Offers First Batch of Goodies for MINI Countryman


German tuner AC Schnitzer has launched its first tuning package for the MINI Countryman . The focus is clearly on the wheels, as clients can choose between four different designs in two different sizes (18- or 19-inch) to go with the two-tone white and black exterior paint job. In fact, AC Schnitzer has just broken a personal record: in a company first, it has fitted a MINI with 19-inch rims. As for the interior, the tuning house offers an aluminum pedal set and gear knob or various knobs clad in leather with incorporated, digital gear display unit.

By Csaba Daradics



_______________________________GALLERY_______________________________


1955 Ford "Beatnik" Bubbletop Custom Concept going up for Auction


Making its way down to Florida for RM Auction's annual Amelia Island event on March 2, is this 1955 Ford "Beatnink" Bubbletop custom concept inspired by futuristic design studies from the 1950s. Despite its name, the Beatnik is a fairly new creation built by Gary “Chopit” Fioto. It is based on the body of a 1955 Ford model but rides on a modifies chassis of a 1988 Lincoln Town Car and is powered by a Chevrolet 350-cubic inch small-block V8 engine.

The brand mixing doesn't stop there as Fioto used a variety of components from Cadillac, Chrysler and Lincoln, including the canted quad headlights. The front bumper was adapted from a '59 Cadillac, while the rear bumper was fashioned from the front bumper of a '58 Cadillac. In addition, the finned taillights are sourced from a 1960 Chrysler. However, the front and rear fenders, the door skins and the entire rear section of the car were all hand formed.

The one-of-a-kind model, which took four years of hard work to create, also features a bespoke interior complete with an aircraft control yoke-inspired steering wheel and a rounded dash pod as a tribute to the late 1950s and early 1960s concept cars from Detroit.


_______________________________GALLERY_______________________________